Abstract:
Background Wastewater from wet etching and cleaning in integrated-circuit manufacturing contains fluoride and various dissolved salts. Although calcium-based precipitation and solid-liquid separation remove most fluoride, residual fluoride concentrations ranging from a few to several tens of milligrams per liter may persist alongside competing ions. This low-fluoride, high-salinity matrix poses challenges for selective adsorption and stable regeneration.
Scope and Progress This review examines layered double hydroxides (LDHs) as tunable adsorbents for fluoride polishing after primary treatment, rather than as replacements for bulk fluoride removal or desalination. It relates industrial wastewater characteristics to the requirements of low-concentration adsorption. Two principal removal pathways are distinguished: interlayer anion exchange, governed by the identity and binding stability of pre-existing anions, and fluoride binding at metal hydroxyl sites, influenced by metal composition and local coordination environments. Calcination-induced structural reconstruction offers an additional route for fluoride incorporation into restored interlayers. Structural regulation is examined in terms of interlayer accessibility, exchangeability, site affinity, and the balance between fluoride binding and regenerability. Anion-specific competition from sulfate, phosphate, carbonate, and nitrate is distinguished from ionic-strength effects on interfacial interactions and adsorption equilibria. For saline effluents, this distinction matters because total salt concentration alone cannot predict fluoride selectivity or breakthrough behavior. Potential interference from dissolved silicon, residual particles, elevated calcium concentrations, and pH fluctuations is also discussed.
Applications Regeneration is evaluated using desorption efficiency, adsorption-capacity recovery, fluoride enrichment, regenerant consumption, and metal leaching as complementary metrics. Continuous treatment is discussed through breakthrough behavior, empty-bed contact time, intraparticle mass-transfer resistance, and the applicability and limitations of Thomas, Yoon-Nelson, and bed-depth/service-time models. In situ bed regeneration and alternating multicolumn operation are considered as potential strategies for continuous treatment. Electrode-integrated LDH systems may facilitate ion migration and electrically controlled fluoride release, although electric-field-driven accumulation does not necessarily enhance selectivity in competing-ion matrices.
Perspectives Available evidence remains dominated by batch experiments, simplified water matrices, and short-duration continuous tests. Dynamic model predictions, long-term structural stability, and the separation of adsorption from concurrent precipitation require verification using actual pretreated wastewater. Future work should combine realistic fluctuations in water composition with extended breakthrough and regeneration experiments, distinguish incomplete regeneration from irreversible structural degradation, and optimize column switching or electrode-potential protocols. Evaluation should shift from maximum equilibrium adsorption capacity toward cumulative compliant water throughput, regenerant and energy consumption, fluoride-containing waste volume, and material lifetime. Assessment under consistent influent chemistry and effluent targets is essential for translating material findings into practical designs. Such process-level evidence is needed to establish the operating boundaries and engineering feasibility of LDH-based fluoride polishing.